The B220611 BACKLESS model Pool Pump & Filter Cover is designed to fit a small filter (sand or cartridge) and up to four pumps, solar heating pump a blower and spa pump. It has 2 access points from the front (fully removable doors) and 2 from the top (lids erect by 1000mm when opened using mechanical gas struts)
Reduces noise by 80%! - Assembles in 25-45 minutes with absolutely NO NUTS / BOLTS or any TOOLS. Galvanised & Powder Coated - Rust Proof. Protects your Pool Pump / Filter with engineered ventilation gaps, easy lift out access from front & top.
All our Pool Filter / Pump Covers can be assembled in 15 minutes (single box) to 60 minutes (double box) with no handiwork experience or any tools.
The Material & Fabrication
The Pool Filter & Pump Cover weights approx. between 60 and 100 KGS in total, depending on the model, and is made of 0.9 mm thick Galvanised (BlueScope™) steel and finished with dense (Dulux Colorbond™) powder coating. All external and internal accessories are either galvanized or made of solid stainless steel.
The Galvanization means that the box is designed not to rust for 15+ years. The unique design and fabrication ensure withstanding the harsh Australian environment and extreme weather conditions.
The box has 20mm thick dressed pine timber piece on the rear panel - for affixing controller units, Chlorinators and Power Points/GPOs.
Engineered Ventilation Gaps
There're also 25mm ventilation gaps at the front and back of the box allowing for proper air-flow in and out of the box to protect the equipment.
Easy access – servicing equipment
The rear ventilation gap also allows for conduits / wirings to pass through in and out of the box (for example: power chords.). The lid can be totally removed (2 easy hinge pins on either side) allowing for larger conduits / equipment to pass through.
The front of the box allows for unhindered access into the box - making servicing the equipment a breeze. The front door can be fully removed with no bars across the middle of the box- which means that you can physically step inside the box when servicing the equipment.
The 20mm thick Acoustic Foam (29/400 grade) is industrially affixed internally on every panel – and comes certified by an independent Acoustic Engineer to reduce noise by up to 80%.
The Pool Filter & Pump cover is designed with child safety features making it virtually impossible or children to access the box. The box can also be locked using any common lock.
Our Pool Filter / Pump Enclosures:
The B220611 Pool Filter / Pump enclosure measurements (in MM):
External: 2218(W) X 710(D) X 1145(H)
Internal: 2168(W) X 685(D) X 1100(H)
Notes with regards to measurements:
The external measurements are actually the same as the internal measurements throughout the box with the exception of the bottom and top of the box - where the metal bends to allow for the acoustic foaming to be housed.
It is advisable to allow for an additional 10-20mm on all asides of your Concrete slab (if laying the box on a slab)
The lid requires 45mm of clearance at rear to fully open. Please consider if placing the box against a wall or other hard surfaces.
This model WILL fit a sand filter with a diameter of 25" or less
The unique design of our Pool Filter / Pump enclosures means that there are absolutely NO NUTS & BOLTS and NO need for any TOOLS to assemble the box. On average, models that are <1.7m in width (single) take 15-20 minutes to assemble and models that are >1.7m (double) take 45 - 60 minutes.
The panels are joined together at the bottom by 4 corner brackets and locked at the top by 4 corner caps.
The box comes flat packed and is either hand unloaded by our driver at destination (Sydney metro deliveries) or packed in large cardboard boxes (for regional and interstate deliveries) .
Please click here to watch our 3D assembly instructions
Delivery & Pickups
The Acoustic Box™ delivers to all areas in Australia.
Delivery fee varies by location and proximity to our warehouse in Sydney. Delivery lead times is (generally) 5-7 days (Sydney metro) and 7-14 days (Regional & Interstate).
Trade customers are welcome to pick up (by appointment only) from our warehouse in Sydney. Please see our delivery terms and conditions (in the T&Cs) section for more information.
Terms & Conditions
B) Warranties, exchanges, refunds & faulty goods
8. The Acoustic Box™ offers a pro-rata 7-year warranty on all other parts of the box. Proof of purchase is required and warranties are not transferable. This warranty does not cover:
C) Credit & Payments.