Need to comply with the ' No stepping laws' ? Is your equipment against the boundary fence and within the Non-climable zone?
The 111118 model Pool Pump & Filter Cover is designed to fit a small filter (sand or cartridge) and up to two pumps, . It has 1 access point1 from the front (2 fully removable doors on top of each other) and 1 from the top (lid erects by 1000mm when opened using mechanical gas struts)
This model is also available in Backless at no extra cost
Reduces noise by 80%! - Assembles in 25-45 minutes with absolutely NO NUTS / BOLTS or any TOOLS. Galvanised & Powder Coated - Rust Proof. Protects your Pool Pump / Filter with engineered ventilation gaps, easy lift out access from front & top.
(02) 9620 5430 or Email us
The Material & Fabrication
The Pool Filter & Pump Cover weights approx. between 60 and 100 KGS in total (epending on the model) and is made of 1 mm thick Galvanised steel and finished with dense Powder coating. All external and internal accessories are either galvanized or made of solid stainless steel.
The Galvanization means that the box will not rust for 15+ years. The unique design and fabrication ensures withstanding the harsh Australian environment and extreme weather conditions.
The box has 20mm thick dressed pine timber piece on the rear panel - for affixing controller units, Chlorinators and Power Points.
Engineered Ventilation Gaps
There're also 25mm ventilation gaps at the front and back of the box allowing for proper air-flow in and out of the box to protect the equipment.
Easy access – servicing equipment
The rear ventilation gap also allows for conduits / wirings to pass through in and out of the box (for example: power chords.). The lid can also be totally removed (2 easy hinge pins on either side) allowing for larger conduits / equipment to pass through.
The front of the box allows for unhindered access into the box - making servicing the equipment a breeze. The front door can be fully removed with no bars across the middle of the box- which means that you can physically step inside the box when servicing the equipment.
The 20 mm thick Acoustic Foam is industrially affixed internally on every panel – and comes certified by an Acoustic Engineer to reduce noise by up to 80%.
The Pool Filter & Pump cover is deisgned with child safety features making it virtually impossible or children to access the box. The box can aso be locked using any common lock.
Our Pool Filter / Pump Enclosures:
The Acoustic Box comes in 10 Standard colours as below. All the colours correspond to a colorbond colour.
We can also cater for custom colours upon request with no added lead time (additional charges apply for custom colours)
Item 111118 Pool Filter / Pump enclosure measurements (in MM):
External: 1100(W) X 1100(D) X 1845(H)
Internal: 1050(W) X 1050(D) X 1800(H)
Notes with regards to measurements:
1. The external measurements are virtually the same as the internal measurements throughout the box with the exception of the bottom and top of the box - where the metal bends to allow for the acoustic foaming to be housed.
The unique design of our Pool Filter / Pump enclosures means that there are absolutely NO NUTS & BOLTS and NO need for any TOOLS to assemble the box. On average, models that are <1.7m in width take as little as 15-30 minutes to assemble and models that are >1.7m approximately 45 - 60 minutes with 2 people.
The panels are joined together at the bottom by 4 corner brackets and locked at the top by 4 corner caps.
The box comes flat packed and is either hand unloaded by our driver at destination (Sydney metro deliveries) or packed in large cardboard boxes (for regional and interstate deliveries) .
Please click here to watch our 3D assembly instructions
The Acoustic Box™ delivers to all areas in Australia .
Delivery fee varies by location and proximity to our warehosue in Sydney
Delivery lead times is (generally) 5-7 days (Sydney metro) and 7-14 days (Regional & Interstate). Customers are also welcome to pick up (by appointment only) from our warehouse in Sydney. Please see our delivery terms and conditions (in the T&C) section for more information.
Terms & Conditions
g. The Acoustic Box™ offers a 7-year warranty on all parts of the box. This warranty does not cover:
C) Credit & Payments.